This release enhances CalDAV/CardDAV and PBAP syncing and fixes some
problems. The enhanced conflict handling introduced 184.108.40.206 was
unintentionally limited to syncs with EDS on the server side; it is
now also available for example in WebDAV<->SyncML bridge setups.
* CardDAV: implement read-ahead
Instead of downloading contacts one-by-one with GET, SyncEvolution now
looks at contacts that are most likely going to be needed soon and
gets all of them at once with addressbook-multiget REPORT.
The number of contacts per REPORT is 50 by default, configurable by
setting the SYNCEVOLUTION_CARDDAV_BATCH_SIZE env variable.
This has two advantages:
- It avoids round-trips to the server and thus speeds up a large
download (100 small contacts with individual GETs took 28s on
a fast connection, 3s with two REPORTs).
- It reduces the overall number of requests. Google CardDAV is known
to start issuing intermittent 401 authentication errors when the
number of contacts retrieved via GET is too large. Perhaps this
can be avoided with addressbook-multiget.
* Google Calendar: remove child hack, improve alarm hack (FDO #63881)
Google recently enhanced support for RECURRENCE-ID, so SyncEvolution
no longer needs to replace the property when uploading a single
detached event with RECURRENCE-ID. However, several things are still
broken in the server, with no workaround in SyncEvolution:
- Removing individual events gets ignored by the server;
a full "wipe out server data" might work (untested).
- When updating the parent event, all child events also get
updated even though they were included unchanged in the data
sent by SyncEvolution.
- The RECURRENCE-ID of a child event of an all-day recurring event
does not get stored properly.
- The update hack seems to fail for complex meetings: uploading them
once and then deleting them seems to make uploading them again
All of these issues were reported to Google and are worked on there,
so perhaps the situation will improve. In the meantime, syncing with
Google CalDAV should better be limited to:
- Downloading a Google calendar in one-way mode.
- Two-way syncing of simple calendars without complex meeting
While updating the Google workarounds, the alarm hack (sending a
new event without alarms twice to avoid the automatic server side
alarm) was simplified. Now the new event gets sent only once with a
* ephemeral sync: don't write binfile client files (FDO #55921)
When doing PBAP caching, we don't want any meta data written because
the next sync would not use it anyway. With the latest libsynthesis
we can configure "/dev/null" as datadir for the client's binfiles and
libsynthesis will avoid writing them.
The PIM manager uses this for PBAP syncing automatically. For testing
it can be enabled by setting the SYNCEVOLUTION_EPHEMERAL env variable.
* PBAP: avoid empty field filter
Empty field filter is supposed to mean "return all supported
fields". This used to work and stopped working with Android phones
after an update to 4.3 (seen on Galaxy S3); now the phone only
returns the mandatory TEL, FN, N fields.
The workaround is to replace the empty filter list with the list of
known and supported properties. This means we only pull data we really
need, but it also means we won't get to see any additional properties
that the phone might support.
* PBAP: transfer in chunks (FDO #77272)
If enabled via env variables, PullAll transfers will be limited to
a certain numbers contacts at different offsets until all data got
pulled. See PBAP README for details.
When transfering in chunks, the enumeration of contacts for the engine
no longer matches the PBAP enumeration. Debug output uses "offset #x"
for PBAP and "ID y" for the engine.
* PBAP: remove transfer via pipe
Using a pipe was never fully supported by obexd (blocks
obexd). Transfering in suitably sized chunks (FDO #77272) will be a
more obexd friendly solution with a similar effect (not having to
buffer the entire address book in memory).
* engine: enable batching by default (FDO #52669)
This reverts commit c435e937cd406e904c437eec51a32a6ec6163102.
Commit 7b636720a in libsynthesis fixes an unitialized memory read in
the asynchronous item update code path.
Testing confirms that we can now used batched writes reliably with EDS
(the only backend currently supporting asynchronous writes +
batching), so this change enables it again also for local and
SyncEvolution<->SyncEvolution sync (with asynchronous execution of
contact add/update overlapped with SyncML message exchanges) and other
SyncML syncs (with changes combined into batches and executed at the
end of each message).
* datatypes: fix contact caching
Adding grouping to the contact datatype in 220.127.116.11 broke PBAP caching: when
sending an empty URL, for example, during the sync, the parsed contact
had different field arrays than the locally stored contact, because the
latter was saved without the empty URL.
This caused the field-based comparison to detect a difference even when
the final, reencoded contact wasn't different at all.
To solve this, syncing now uses the same "don't send empty properties"
configuration as local storages. Testing shows that this resolves
the difference for EDS.
A more resilient solution would be to add a check based on the encoded
data, but that's more costly performance wise.
* datatypes: fix vCard handling
The new "preserve repeating properties during conflict resolution"
feature from 18.104.22.168 was only active when using EDS as storage. The relevant
merge script must be applied to all datatypes, not just the EDS
The feature was also unintentionally active when running in
caching mode. This caused two problems:
- The cached item was updated even though only the
ordering of repeating properties had been modified during
- The merged item was sent back to the client side, which
was undesirable (caching is supposed to be one-way) or even
impossible (PBAP is read-only, causing sync failures eith error 20030).
We must check for caching mode and disable merging when it is active.
We also must not tell the engine that we updated the photo property
in the winning item, because then that item would get sent to the
read-only side of the sync.
Perhaps a better solution would be to actually tell the engine
that the remote side is read-only when we activate caching mode.
* datatypes: avoid PHOTO corruption during merge (FDO #77065)
When handling an update/update conflict (both sides of the sync have an
updated contact) and photo data was moved into a local file by EDS, the engine
merged the file path and the photo data together and thus corrupted the photo.
The engine does not know about the special role of the photo property.
This needs to be handled by the merge script, and that script did not
cover this particular situation. Now the loosing side is cleared,
causing the engine to then copy the winning side over into the loosing
Found by Renato Filho/Canonical when testing SyncEvolution for Ubuntu 14.04.
* PBAP syncing: updated photo not always stored
Because photo data was treated like a C string, changes after any
embedded null byte were ignored during a comparison.
* PIM: fix phone number normalization
The parsed number always has a country code, whereas SyncEvolution expected it
to be zero for strings without an explicit country code. This caused a caller
ID lookup of numbers like "089788899" in DE to find only telephone numbers in
the current default country, instead of being more permissive and also finding
"+189788899". The corresponding unit test was broken and checked for the
result. Found while investigating an unrelated test failure when updating
* Various compiler problems and warnings fixed; compiles with
--with-warnings=fatal on current Debian Testing and Ubuntu Trusty
Upgrading from releases <= 22.214.171.124:
If the value of "username/databaseUser/proxyUser" contains a colon,
the "user:" prefix must be added to the value, to continue treating it
like a plain user name and not some reference to an unknown identity
provider (like "id:", "goa:", "signon:", etc.).
The lookup of passwords in GNOME Keyring was updated slightly in
126.96.36.199. It may be necessary to set passwords anew if the old one is
no longer found.
Upgrading from release 1.2.x:
The sync format of existing configurations for Mobical (aka Everdroid)
must be updated manually, because the server has encoding problems when
using vCard 3.0 (now the default for Evolution contacts):
syncevolution --configure \
The Funambol template explicitly enables usage of the
"refresh-from-server" sync mode to avoid getting throttled with 417
'retry later' errors. The same must be added to existing configs
syncevolution --configure \
Upgrading from releases before 1.2:
Old configurations can still be read. But writing, as it happens
during a sync, must migrate the configuration first. Releases >= 1.2
automatically migrates configurations. The old configurations
will still be available (see "syncevolution --print-configs") but must
be renamed manually to use them again under their original names with
older SyncEvolution releases.
Source, Installation, Further information
Source code bundles for users are available in
and the original source is in the git repositories
i386, lpia and amd64 binaries for Debian-based distributions are
available via the "unstable" syncevolution.org
repository. Add the
following entry to your /apt/source.list:
Then install "syncevolution-evolution", "syncevolution-kde" and/or
These binaries include the "sync-ui" GTK GUI and were compiled for
Ubuntu 10.04 LTS (Lucid), except for ActiveSync binaries which were
compiled for Debian Wheezy, Ubuntu Saucy and Ubuntu Trusty. A backend
for Ubuntu Online Accounts was compiled on Ubuntu Saucy. The packages
mentioned above are meta-packages which pull in suitable packages
matching the distro during installation.
Older distributions like Debian 4.0 (Etch) can no longer be supported
with precompiled binaries because of missing libraries, but the source
still compiles when not enabling the GUI (the default).
The same binaries are also available as .tar.gz and .rpm archives in
. In contrast
to 0.8.x archives, the 1.x .tar.gz archives have to be unpacked and the
content must be moved to /usr, because several files would not be found
After installation, follow the
Patrick Ohly, on behalf of everyone who has helped
to make SyncEvolution possible: