Hi Rong, Thanks. I was able to reproduce the issue with linux-next and fixed it yesterday. I have some generic questions about kbuild infrastructure. 1. Is there a way to check if 0-day build bot actually built my branch ? The search option doesn't seem to work. I have seen build success emails for other trees but I never receive them for any repository on my github.

2. AFAIK, build bot schedules the builds from each repo randomly. Can we request to build a specific repo sooner than later?

On Fri, Aug 28, 2020 at 12:20 AM Rong Chen <rong.a.chen(a)intel.com&gt; wrote: > Hi Atish, > > We can reproduce this error if using the reproduce steps: > > reproduce (this is a W=1 build): > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross > chmod +x ~/bin/make.cross > git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 > # save the attached .config to linux build tree > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv > > Best Regards, > Rong Chen > > > On 8/27/20 6:20 AM, Atish Patra wrote: >> I can't seem to reproduce this issue. I have an older version gcc >> though (8.2). I am surprised by the error as well we are already >> including the early_ioremap.h. >> >> --- a/arch/riscv/include/asm/Kbuild >> +++ b/arch/riscv/include/asm/Kbuild >> @@ -1,4 +1,5 @@ >> # SPDX-License-Identifier: GPL-2.0 >> +generic-y += early_ioremap.h >> generic-y += extable.h >> generic-y += flat.h >> generic-y += kvm_para.h >> >> On Wed, 2020-08-26 at 09:54 +0800, kernel test robot wrote: >>> tree: >>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git for- >>> next >>> head: f75fa0a51b8b544ebd0d03a74c6b04d9f6b95781 >>> commit: 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 [2/7] RISC-V: Add >>> early ioremap support >>> config: riscv-allyesconfig (attached as .config) >>> compiler: riscv64-linux-gcc (GCC) 9.3.0 >>> reproduce (this is a W=1 build): >>> wget >>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross >>> -O ~/bin/make.cross >>> chmod +x ~/bin/make.cross >>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 >>> # save the attached .config to linux build tree >>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 >>> make.cross ARCH=riscv >>> >>> If you fix the issue, kindly add following tag as appropriate >>> Reported-by: kernel test robot <lkp(a)intel.com&gt; >>> >>> All errors (new ones prefixed by >>): >>> >>> arch/riscv/kernel/setup.c: In function 'setup_arch': >>>>> arch/riscv/kernel/setup.c:74:2: error: implicit declaration of >>>>> function 'early_ioremap_setup' [-Werror=implicit-function- >>>>> declaration] >>> 74 | early_ioremap_setup(); >>> | ^~~~~~~~~~~~~~~~~~~ >>> cc1: some warnings being treated as errors >>> >>> # >>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git/commit/?i... >>> git remote add riscv >>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git >>> git fetch --no-tags riscv for-next >>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 >>> vim +/early_ioremap_setup +74 arch/riscv/kernel/setup.c >>> >>> 63 >>> 64 void __init setup_arch(char **cmdline_p) >>> 65 { >>> 66 parse_dtb(); >>> 67 init_mm.start_code = (unsigned long) _stext; >>> 68 init_mm.end_code = (unsigned long) _etext; >>> 69 init_mm.end_data = (unsigned long) _edata; >>> 70 init_mm.brk = (unsigned long) _end; >>> 71 >>> 72 *cmdline_p = boot_command_line; >>> 73 >>> > 74 early_ioremap_setup(); >>> 75 parse_early_param(); >>> 76 >>> 77 setup_bootmem(); >>> 78 paging_init(); >>> 79 #if IS_ENABLED(CONFIG_BUILTIN_DTB) >>> 80 unflatten_and_copy_device_tree(); >>> 81 #else >>> 82 if (early_init_dt_verify(__va(dtb_early_pa))) >>> 83 unflatten_device_tree(); >>> 84 else >>> 85 pr_err("No DTB found in kernel >>> mappings\n"); >>> 86 #endif >>> 87 >>> >>> --- >>> 0-DAY CI Kernel Test Service, Intel Corporation >>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org > _______________________________________________ > kbuild-all mailing list -- kbuild-all(a)lists.01.org > To unsubscribe send an email to kbuild-all-leave(a)lists.01.org -- Regards, Atish

On Sun, Aug 30, 2020 at 7:40 PM Rong Chen <rong.a.chen(a)intel.com&gt; wrote: > > > > On 8/29/20 12:53 AM, Atish Patra wrote: > > Hi Rong, > > Thanks. I was able to reproduce the issue with linux-next and fixed it > > yesterday. > > I have some generic questions about kbuild infrastructure. > > > > 1. Is there a way to check if 0-day build bot actually built my branch ? > > The search option doesn't seem to work. I have seen build success > > emails for other trees but I never receive them for any repository on > > my github. > > Hi Atish, > > Could you tell me the tree url you owned? we can send the build success > emails to you. > Here is my github repo. https://github.com/atishp04/linux > > > > 2. AFAIK, build bot schedules the builds from each repo randomly. Can > > we request to build a specific repo sooner than later? > > We don't support it yet, but you can ping us (lkp(a)intel.com) to build > the repo manually. > Thanks. > Best Regards, > Rong Chen > > > > > > > > > On Fri, Aug 28, 2020 at 12:20 AM Rong Chen <rong.a.chen(a)intel.com&gt; wrote: > >> Hi Atish, > >> > >> We can reproduce this error if using the reproduce steps: > >> > >> reproduce (this is a W=1 build): > >> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross > >> chmod +x ~/bin/make.cross > >> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 > >> # save the attached .config to linux build tree > >> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv > >> > >> Best Regards, > >> Rong Chen > >> > >> > >> On 8/27/20 6:20 AM, Atish Patra wrote: > >>> I can't seem to reproduce this issue. I have an older version gcc > >>> though (8.2). I am surprised by the error as well we are already > >>> including the early_ioremap.h. > >>> > >>> --- a/arch/riscv/include/asm/Kbuild > >>> +++ b/arch/riscv/include/asm/Kbuild > >>> @@ -1,4 +1,5 @@ > >>> # SPDX-License-Identifier: GPL-2.0 > >>> +generic-y += early_ioremap.h > >>> generic-y += extable.h > >>> generic-y += flat.h > >>> generic-y += kvm_para.h > >>> > >>> On Wed, 2020-08-26 at 09:54 +0800, kernel test robot wrote: > >>>> tree: > >>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git for- > >>>> next > >>>> head: f75fa0a51b8b544ebd0d03a74c6b04d9f6b95781 > >>>> commit: 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 [2/7] RISC-V: Add > >>>> early ioremap support > >>>> config: riscv-allyesconfig (attached as .config) > >>>> compiler: riscv64-linux-gcc (GCC) 9.3.0 > >>>> reproduce (this is a W=1 build): > >>>> wget > >>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross > >>>> -O ~/bin/make.cross > >>>> chmod +x ~/bin/make.cross > >>>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 > >>>> # save the attached .config to linux build tree > >>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 > >>>> make.cross ARCH=riscv > >>>> > >>>> If you fix the issue, kindly add following tag as appropriate > >>>> Reported-by: kernel test robot <lkp(a)intel.com&gt; > >>>> > >>>> All errors (new ones prefixed by >>): > >>>> > >>>> arch/riscv/kernel/setup.c: In function 'setup_arch': > >>>>>> arch/riscv/kernel/setup.c:74:2: error: implicit declaration of > >>>>>> function 'early_ioremap_setup' [-Werror=implicit-function- > >>>>>> declaration] > >>>> 74 | early_ioremap_setup(); > >>>> | ^~~~~~~~~~~~~~~~~~~ > >>>> cc1: some warnings being treated as errors > >>>> > >>>> # > >>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git/commit/?i... > >>>> git remote add riscv > >>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git > >>>> git fetch --no-tags riscv for-next > >>>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 > >>>> vim +/early_ioremap_setup +74 arch/riscv/kernel/setup.c > >>>> > >>>> 63 > >>>> 64 void __init setup_arch(char **cmdline_p) > >>>> 65 { > >>>> 66 parse_dtb(); > >>>> 67 init_mm.start_code = (unsigned long) _stext; > >>>> 68 init_mm.end_code = (unsigned long) _etext; > >>>> 69 init_mm.end_data = (unsigned long) _edata; > >>>> 70 init_mm.brk = (unsigned long) _end; > >>>> 71 > >>>> 72 *cmdline_p = boot_command_line; > >>>> 73 > >>>> > 74 early_ioremap_setup(); > >>>> 75 parse_early_param(); > >>>> 76 > >>>> 77 setup_bootmem(); > >>>> 78 paging_init(); > >>>> 79 #if IS_ENABLED(CONFIG_BUILTIN_DTB) > >>>> 80 unflatten_and_copy_device_tree(); > >>>> 81 #else > >>>> 82 if (early_init_dt_verify(__va(dtb_early_pa))) > >>>> 83 unflatten_device_tree(); > >>>> 84 else > >>>> 85 pr_err("No DTB found in kernel > >>>> mappings\n"); > >>>> 86 #endif > >>>> 87 > >>>> > >>>> --- > >>>> 0-DAY CI Kernel Test Service, Intel Corporation > >>>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org > >> _______________________________________________ > >> kbuild-all mailing list -- kbuild-all(a)lists.01.org > >> To unsubscribe send an email to kbuild-all-leave(a)lists.01.org > > > > > > -- > > Regards, > > Atish > -- Regards, Atish

Hi Atish, Thanks for your suggestion, we have added these default configs.

Best Regards, Rong Chen On 9/17/20 6:30 AM, Atish Patra wrote: > Hi Rong, > Thanks for setting up the build success emails for me. I noticed that > RISC-V builds happen only for > following configs > > riscv allyesconfig > riscv defconfig > riscv allmodconfig > riscv allnoconfig > > Is it possible to build a couple of more default configs from RISC-V > tree as shown below? > > $ ls -r arch/riscv/configs/ > rv32_defconfig nommu_virt_defconfig nommu_k210_defconfig defconfig > > On Sun, Aug 30, 2020 at 9:06 PM Atish Patra <atishp(a)atishpatra.org&gt; wrote: >> On Sun, Aug 30, 2020 at 7:40 PM Rong Chen <rong.a.chen(a)intel.com&gt; wrote: >>> >>> >>> On 8/29/20 12:53 AM, Atish Patra wrote: >>>> Hi Rong, >>>> Thanks. I was able to reproduce the issue with linux-next and fixed it >>>> yesterday. >>>> I have some generic questions about kbuild infrastructure. >>>> >>>> 1. Is there a way to check if 0-day build bot actually built my branch ? >>>> The search option doesn't seem to work. I have seen build success >>>> emails for other trees but I never receive them for any repository on >>>> my github. >>> Hi Atish, >>> >>> Could you tell me the tree url you owned? we can send the build success >>> emails to you. >>> >> Here is my github repo. >> https://github.com/atishp04/linux >> >>>> 2. AFAIK, build bot schedules the builds from each repo randomly. Can >>>> we request to build a specific repo sooner than later? >>> We don't support it yet, but you can ping us (lkp(a)intel.com) to build >>> the repo manually. >>> >> Thanks. >> >>> Best Regards, >>> Rong Chen >>> >>>> >>>> >>>> On Fri, Aug 28, 2020 at 12:20 AM Rong Chen <rong.a.chen(a)intel.com&gt; wrote: >>>>> Hi Atish, >>>>> >>>>> We can reproduce this error if using the reproduce steps: >>>>> >>>>> reproduce (this is a W=1 build): >>>>> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross >>>>> chmod +x ~/bin/make.cross >>>>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 >>>>> # save the attached .config to linux build tree >>>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv >>>>> >>>>> Best Regards, >>>>> Rong Chen >>>>> >>>>> >>>>> On 8/27/20 6:20 AM, Atish Patra wrote: >>>>>> I can't seem to reproduce this issue. I have an older version gcc >>>>>> though (8.2). I am surprised by the error as well we are already >>>>>> including the early_ioremap.h. >>>>>> >>>>>> --- a/arch/riscv/include/asm/Kbuild >>>>>> +++ b/arch/riscv/include/asm/Kbuild >>>>>> @@ -1,4 +1,5 @@ >>>>>> # SPDX-License-Identifier: GPL-2.0 >>>>>> +generic-y += early_ioremap.h >>>>>> generic-y += extable.h >>>>>> generic-y += flat.h >>>>>> generic-y += kvm_para.h >>>>>> >>>>>> On Wed, 2020-08-26 at 09:54 +0800, kernel test robot wrote: >>>>>>> tree: >>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git for- >>>>>>> next >>>>>>> head: f75fa0a51b8b544ebd0d03a74c6b04d9f6b95781 >>>>>>> commit: 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 [2/7] RISC-V: Add >>>>>>> early ioremap support >>>>>>> config: riscv-allyesconfig (attached as .config) >>>>>>> compiler: riscv64-linux-gcc (GCC) 9.3.0 >>>>>>> reproduce (this is a W=1 build): >>>>>>> wget >>>>>>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross >>>>>>> -O ~/bin/make.cross >>>>>>> chmod +x ~/bin/make.cross >>>>>>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 >>>>>>> # save the attached .config to linux build tree >>>>>>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 >>>>>>> make.cross ARCH=riscv >>>>>>> >>>>>>> If you fix the issue, kindly add following tag as appropriate >>>>>>> Reported-by: kernel test robot <lkp(a)intel.com&gt; >>>>>>> >>>>>>> All errors (new ones prefixed by >>): >>>>>>> >>>>>>> arch/riscv/kernel/setup.c: In function 'setup_arch': >>>>>>>>> arch/riscv/kernel/setup.c:74:2: error: implicit declaration of >>>>>>>>> function 'early_ioremap_setup' [-Werror=implicit-function- >>>>>>>>> declaration] >>>>>>> 74 | early_ioremap_setup(); >>>>>>> | ^~~~~~~~~~~~~~~~~~~ >>>>>>> cc1: some warnings being treated as errors >>>>>>> >>>>>>> # >>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git/commit/?i... >>>>>>> git remote add riscv >>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git >>>>>>> git fetch --no-tags riscv for-next >>>>>>> git checkout 3d109b0e0949bfd68cc00ffa9d78186fab037bc1 >>>>>>> vim +/early_ioremap_setup +74 arch/riscv/kernel/setup.c >>>>>>> >>>>>>> 63 >>>>>>> 64 void __init setup_arch(char **cmdline_p) >>>>>>> 65 { >>>>>>> 66 parse_dtb(); >>>>>>> 67 init_mm.start_code = (unsigned long) _stext; >>>>>>> 68 init_mm.end_code = (unsigned long) _etext; >>>>>>> 69 init_mm.end_data = (unsigned long) _edata; >>>>>>> 70 init_mm.brk = (unsigned long) _end; >>>>>>> 71 >>>>>>> 72 *cmdline_p = boot_command_line; >>>>>>> 73 >>>>>>> > 74 early_ioremap_setup(); >>>>>>> 75 parse_early_param(); >>>>>>> 76 >>>>>>> 77 setup_bootmem(); >>>>>>> 78 paging_init(); >>>>>>> 79 #if IS_ENABLED(CONFIG_BUILTIN_DTB) >>>>>>> 80 unflatten_and_copy_device_tree(); >>>>>>> 81 #else >>>>>>> 82 if (early_init_dt_verify(__va(dtb_early_pa))) >>>>>>> 83 unflatten_device_tree(); >>>>>>> 84 else >>>>>>> 85 pr_err("No DTB found in kernel >>>>>>> mappings\n"); >>>>>>> 86 #endif >>>>>>> 87 >>>>>>> >>>>>>> --- >>>>>>> 0-DAY CI Kernel Test Service, Intel Corporation >>>>>>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org >>>>> _______________________________________________ >>>>> kbuild-all mailing list -- kbuild-all(a)lists.01.org >>>>> To unsubscribe send an email to kbuild-all-leave(a)lists.01.org >>>> >>>> -- >>>> Regards, >>>> Atish >> >> -- >> Regards, >> Atish > >