April 2016 - iGVT-g - Ml01.01.Org

Re: [iGVT-g] [ANNOUNCE][RFC] KVMGT - the implementation of Intel GVT-g(full GPU virtualization) for KVM

by Jike Song

Hi all, We are pleased to announce another update of Intel GVT-g for KVM. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. KVM is supported by Intel GVT-g(a.k.a. KVMGT). Repositories Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) Qemu: https://github.com/01org/igvtg-qemu (kvmgt_public2015q3 branch) This update consists of: - KVMGT is now merged with XenGT in unified repositories(kernel and qemu), but currently different branches for qemu. KVMGT and XenGT share same iGVT-g core logic. - PPGTT supported, hence the Windows guest support - KVMGT now supports both 4th generation (Haswell) and 5th generation (Broadwell) Intel Core(TM) processors - 2D/3D/Media decoding have been validated on Ubuntu 14.04 and Windows7/Windows 8.1 Next update will be around early Jan, 2016. Known issues: - At least 2GB memory is suggested for VM to run most 3D workloads. - 3Dmark06 running in Windows VM may have some stability issue. - Using VLC to play .ogg file may cause mosaic or slow response. Please subscribe the mailing list to report BUGs, discuss, and/or contribute: https://lists.01.org/mailman/listinfo/igvt-g More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): https://01.org/igvt-g http://www.linux-kvm.org/images/f/f3/01x08b-KVMGT-a.pdf https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian Note: The KVMGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the KVMGT project. -- Thanks, Jike On 12/04/2014 10:24 AM, Jike Song wrote: > Hi all, > > We are pleased to announce the first release of KVMGT project. KVMGT is the implementation of Intel GVT-g technology, a full GPU virtualization solution. Under Intel GVT-g, a virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance of performance, feature, and sharing capability. > > > KVMGT is still in the early stage: > > - Basic functions of full GPU virtualization works, guest can see a full-featured vGPU. > We ran several 3D workloads such as lightsmark, nexuiz, urbanterror and warsow. > > - Only Linux guest supported so far, and PPGTT must be disabled in guest through a > kernel parameter(see README.kvmgt in QEMU). > > - This drop also includes some Xen specific changes, which will be cleaned up later. > > - Our end goal is to upstream both XenGT and KVMGT, which shares ~90% logic for vGPU > device model (will be part of i915 driver), with only difference in hypervisor > specific services > > - insufficient test coverage, so please bear with stability issues :) > > > > There are things need to be improved, esp. the KVM interfacing part: > > 1 a domid was added to each KVMGT guest > > An ID is needed for foreground OS switching, e.g. > > # echo <domid> > /sys/kernel/vgt/control/foreground_vm > > domid 0 is reserved for host OS. > > > 2 SRCU workarounds. > > Some KVM functions, such as: > > kvm_io_bus_register_dev > install_new_memslots > > must be called *without* &kvm->srcu read-locked. Otherwise it hangs. > > In KVMGT, we need to register an iodev only *after* BAR registers are > written by guest. That means, we already have &kvm->srcu hold - > trapping/emulating PIO(BAR registers) makes us in such a condition. > That will make kvm_io_bus_register_dev hangs. > > Currently we have to disable rcu_assign_pointer() in such functions. > > These were dirty workarounds, your suggestions are high welcome! > > > 3 syscalls were called to access "/dev/mem" from kernel > > An in-kernel memslot was added for aperture, but using syscalls like > open and mmap to open and access the character device "/dev/mem", > for pass-through. > > > > > The source codes(kernel, qemu as well as seabios) are available at github: > > git://github.com/01org/KVMGT-kernel > git://github.com/01org/KVMGT-qemu > git://github.com/01org/KVMGT-seabios > > In the KVMGT-qemu repository, there is a "README.kvmgt" to be referred. > > > > More information about Intel GVT-g and KVMGT can be found at: > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/KVMGT-a%20Ful... > > > Appreciate your comments, BUG reports, and contributions! > > > > > -- > Thanks, > Jike >

4 years, 3 months

6
11
0 / 0

Re: [iGVT-g] [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel

by Jike Song

Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. Repositories Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) This update consists of: - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. - fix sysfs/debugfs access seldom crash issue - fix a BUG in XenGT I/O emulation logic - improve 3d workload stability Next update will be around early Jan, 2016. Known issues: - At least 2GB memory is suggested for VM to run most 3D workloads. - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. - Resume dom0 from S3 may cause some error message. - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. Please subscribe the mailing list to report BUGs, discuss, and/or contribute: https://lists.01.org/mailman/listinfo/igvt-g More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 07/07/2015 10:49 AM, Jike Song wrote: > Hi all, > > We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). > > Tip of repositories > ------------------------- > > Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 > Qemu: 2a75bbff62c1, Branch: master > Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 > > This update consists of: > - Change time based scheduler timer to be configurable to enhance stability > - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW > - Optimize the emulation of el_status register to enhance stability > - 2D/3D performance in linux VMs has been improved about 50% on BDW > - Fix abnormal idle power consumption issue due to wrong forcewake policy > - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously > - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases > - Next update will be around early Oct, 2015 > > Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: > * 3D conformance may have some failure > * Under high demand 3D workloads, stability issues are detected > * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work > * Hotplug DP may cause black screen even on native environment > > Where to get > > kernel: https://github.com/01org/XenGT-Preview-kernel.git > xen: https://github.com/01org/XenGT-Preview-xen.git > qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > We have a mailing list for GVT-g development, bug report and technical discussion: > > https://lists.01.org/mailman/listinfo/igvt-g > > More information about Intel GVT-g background, architecture, etc can be found at: > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 04/10/2015 09:23 PM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >> >> Tip of repositories >> ------------------------- >> >> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >> Qemu: 2a75bbff62c1, Branch: master >> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >> >> Summary this update >> ------------------------- >> - Preliminary Broadwell support. >> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >> - Next update will be around early July, 2015. >> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >> >> This update consists of: >> - gvt-g core logic code was moved into i915 driver directory. >> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >> >> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >> * Power/performance tuning on BDW is not yet done. >> * Stability needs to be improved. >> * No 32-bit guest OS support. >> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >> >> >> Where to get: >> ----------------- >> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/X... >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> The previous update can be found here: >> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >> >> >> Note >> --------------- >> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 01/09/2015 04:51 PM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> The news of this update: >>> >>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>> - Next update will be around early Apr, 2015. >>> >>> This update consists of: >>> >>> - Including some bug fixes and stability enhancement. >>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>> >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> >>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Gui... >>> >>> The new source codes are available at the updated github repos: >>> >>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> >>> The previous update can be found here: >>> >>> >>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>> >>> >>> >>> Appreciate your comments! >>> >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> >>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>> >>>> >>>> The news of this update: >>>> >>>> >>>> - kernel update from 3.11.6 to 3.14.1 >>>> >>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>> >>>> - Next update will be around early Jan, 2015 >>>> >>>> >>>> This update consists of: >>>> >>>> - Windows HVM support with driver version 15.33.3910 >>>> >>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>> >>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>> >>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>> >>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>> >>>> >>>> >>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>> >>>> >>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Gui... >>>> >>>> >>>> >>>> The new source codes are available at the updated github repos: >>>> >>>> >>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>> >>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>> >>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> >>>> >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... >>>> >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> >>>> The previous update can be found here: >>>> >>>> >>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>> >>>> >>>> Appreciate your comments! >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>> >>>>> The news of this update: >>>>> >>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>> >>>>> This update consists of: >>>>> >>>>> - Stability fixes, e.g. stable DP support >>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>> - Improved support for GPU recovery >>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>> - Experimental Hardware Media Acceleration for decoding. >>>>> >>>>> >>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>> >>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Gui... >>>>> >>>>> >>>>> The new source codes are available at the updated github repos: >>>>> >>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20S... >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> The previous update can be found here: >>>>> >>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>> >>>>> Appreciate your comments! >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>>

4 years, 3 months

1
4
0 / 0

KVMGT support Intel VCA?

by Eddie Yen

Hello, everyone. I had another question again, as title that I survey these days that Intel also released VCA card. It included 3x E3-1285 v4 /w Iris Pro Graphics P6300. Does KVMGT support this device?

4 years, 7 months

2
3
0 / 0

Xeon e3 chips

by Brad Bozarth

I was looking at Skylake chips on which to run iGVT, and was interested in the e3-1275 v5. I noticed on Intel's site, all the i-series consumer chips have 64GB listed as "Graphics Video Max Memory," whereas the e3-12xx v5 Xeon chips have 1.7GB listed. Does that present a problem for running iGVT? The e3-12xx series seems to be the only ECC supporting chip that has integrated graphics, has iGVT been successfully run on it? Thanks, Brad

4 years, 10 months

2
4
0 / 0

[Announcement] Intel GVT-g ISO Release 2016-Q1

by Zhou, Chao

Hi all, If you just want to try and experience what Intel(r) GVT-g is, now you don't need to build source code from scratch. All you need is to plug-in a USB flash disk into an Intel 5th Generation Core platform machine (code name: Broadwell), boot from this USB disk. We're pleased to announce that a GVT-g demo ISO is ready for download, use this ISO file, you can select either booting from a USB disk as a LiveCD or deploying GVT-g into the computer Hard Disk. Features: - Support both XenGT and KVMGT LiveCD - Support deployment of XenGT and KVMGT in local Hard Disk - Include one Dom0/Host (Ubuntu 14.04) and one Guest Linux (Ubuntu 14.04) - Linux 3D workload pre-installed in Linux Guest. - Shortcut to launch Guest or to start 3D workload User guide: - Detailed User Guide please refer to the README inside the ISO. Supported hardware: Intel 5th Gen, Broadwell Download link: https://sourceforge.net/projects/gvt-g-iso Project portal: Official iGVT-g portal: https://01.org/igvt-g If you have any questions, please subscribe to join the mailing list: https://lists.01.org/mailman/listinfo/igvt-g Note: The XenGT and KVMGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT and KVMGT project.

4 years, 10 months

2
2
0 / 0

KVMGT

by info＠delphi-real-estate.com

I am trying to figure out how to set up a KVM guest, and it seems hopelessly complicated without virt-manager. Host is RedHat 7.2 Minimal running the iGVT 4.3 kernel and QEMU. Guests are all LVs in one VG, and are set up and ready to go. NICs are SR-IOV VFs set up and ready to go, 1 or 2 per VM. But in the Setup Guide, I just don't have the days it would take to analyze, learn, fail, and experiment every in and out of creating a guest. (Section 4.1.2) And that's assuming the docs are up to date, which it appears they may not be. There doesn't seem to be a way to connect a specific NIC (MACs are randomized every boot with VFs) to a given VM, given the options available. Then there's setting up video which seems hopelessly complicated. I have only two VMs that need video; the rest can be SSH. I don't have a GUI on the host as this is a Minimal install. Is there a quicker way to get running?

4 years, 10 months

5
8
0 / 0

gm size

by slawek

Hi, I have successfully run Windows 7 VM using 2016Q1 kernel, qemu and kvm. I have lenovo L540 with i7 4702MQ Haswell. I understand Haswell is not officially supported (but I don't have any Broadwell or Skylake hardware) and I am limited by max size of GM, probably 256MB. # lspci -v 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 501e Flags: bus master, fast devsel, latency 0, IRQ 25 Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] # head -1 /sys/kernel/vgt/control/available_resource 0x00000100, 0x00000080, 0x00000700, 0x00000580, 0x00000020, 0x0000001c But... My Win7 VM properly starts only with -vgt_low_gm_sz 128 -vgt_high_gm_sz 384. It doesn't properly boot with lower vgt_high_gm_sz, i.e. 256: kwi 22 11:36:58 cc_l540_arch kernel: vGT error:(kvmgt_guest_mmio_write:280) vgt_emulate_write failed kwi 22 11:36:58 cc_l540_arch kernel: vGT error:(g2h_gm_range:1093) VM(18): invalid address range: g_addr(0x7fc00000), size(0x4) kwi 22 11:36:58 cc_l540_arch kernel: vGT error:(mmio_g2h_gmadr:70) vGT(1): Failed to convert guest graphics memory address: g_value(0x7fc00000), size(0x4) kwi 22 11:36:58 cc_l540_arch kernel: vGT error:(pp_dir_base_write:669) vGT(1): Fail to conver graphics memory(0x1a228), with value(7fc00000) kwi 22 11:36:58 cc_l540_arch kernel: vGT error:(vgt_emulate_write:542) VM(18): invalid MMIO offset(0x0001a228, pa:0x00000000fe41a228),bytes(4)! (and stops with black display and only cursor visible) and it doesn't start with higher vgt_low_gm_sz, ie. 192: kwi 22 11:35:49 cc_l540_arch kernel: vGT: create_vgt_instance: no enough available aperture/gm/fence! (doesn't boot at all) With -vgt_low_gm_sz 128 -vgt_high_gm_sz 384 VM is running quite good but sometimes I get: kwi 20 01:18:42 cc_l540_arch kernel: [drm:i915_gem_object_do_pin [i915]] *ERROR* fail to allocate space from whole GM space, size: 8 I have seen some info that min GM size is 64MB for linux, and 128MB for Windows, so even 256MB should be fine for one Win VM guest. It looks like my win7 VM needs more than 128MB of gm? And it looks like my host also uses 128MB of gm, so only 128MB is available to VM? In general - what affects GM usage on host and VM? Could you point me to some info about it? Thanks, and regards.

4 years, 10 months

4
13
0 / 0

gpu hang when using Windows 7 as guest

by Michael Müller

Hi, I am trying to use Windows 7 as guest and don't have much luck. After installing the driver in the guest system, it won't boot Windows any more and gets stuck while/after displaying the Windows logo. The dmesg output contains information about an untracked MMIO write, followed by a gpu hang. I attached the full output as file. I am also unable to terminate qemu properly after this (needs kill -9). Information about my setup: CPU: i7-4790K Kernel branch: 2016q1-4.3.0 Kernel cmdline (relevant part): i915.enable_vgtbuffer=1 intel_iommu=igfx_off conring_size=4M i915.propagate_monitor_to_guest=0 i915.enable_cmd_parser=0 Qemu branch: 2016q1-2.3.0 Qemu cmdline: qemu-system-x86_64 -m 2048 -enable-kvm -M pc -machine kernel_irqchip=on -vgt -vga vgt -vgt_low_gm_sz 128 -vgt_high_gm_sz 384 -vgt_fence_sz 4 -drive file=win7.qcow2,if=virtio -net nic,model=virtio -net user -usbdevice tablet -soundhw ac97 -smp 2 -vgt_monitor_config_file ./monitor.config -display sdl The monitor.config is copied from the setup guide. Windows driver version: 15.40.4352 Not sure if it makes a difference, but I am not using the intel gpu for rendering on my host system. I slightly modified the vgt ui code to fallback to mmap-ing the dma buffer and transferring the texture content using glTexImage2D when the EGL_MESA_drm_image extension is not available. This allows me to use the egl code with my nvidia card. The hang is unrelated to these changes though as it also happens with an unmodified qemu version. If anyone is interested in it, i can share a patch. Regards, Michael

4 years, 10 months

3
5
0 / 0

Problem about setting up Windows guest

by moreD

Hi, I'm setting up a Windows 10 guest using 2015q4 release but having problem on installing driver. Windows boots normally while using Microsoft's basic video adaptor driver, but it always turned to black screen while installing intel gfx driver and stuck at windows logo when rebooting (I guess it is the time it loads intel driver). My system configuration is as follow: Lenovo thinkpad t440s intel i7-4600u (haswell) with vt-d a nvidia gt730m dGPU, but it won't boot whether pass-through it or not I'm running Debian sid and I've tried both KVMGT and XenGT. my qemu args when using KVMGT are: -cpu host -smp 4 -enable-kvm -m 4096 -M pc -machine kernel_irqchip=on -hda ./win10.qcow2 -s -v gt -vga vgt -vgt_low_gm_sz 256 -vgt_high_gm_sz 384 -vgt_fence_sz 4 -net nic,model=e1000 -net user -soundhw hda And my dmesg until stuck: [ 0.000000] pcpu-alloc: s93208 r8192 d29672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3017568 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0 root=/dev/sda4 ro quiet intel_iommu=igfx_off i915.hvm_boot_foreground=1 i915.enable_cmd_parser=0 i915.propagate_monitor_to_guest=0 loglvl=all guest_loglvl=all conring_size=4M noreboot [ 0.000000] DMAR: Disable GFX device mapping [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 11960964K/12261956K available (6618K kernel code, 907K rwdata, 2912K rodata, 1044K init, 1048K bss, 300992K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2693.909 MHz processor [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.81 BogoMIPS (lpj=2693909) [ 0.000101] pid_max: default: 32768 minimum: 301 [ 0.000119] ACPI: Core revision 20150619 [ 0.015238] Security Framework initialized [ 0.016364] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019885] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021404] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021466] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021717] CPU: Physical Processor ID: 0 [ 0.021732] CPU: Processor Core ID: 0 [ 0.021764] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.021796] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.022872] mce: CPU supports 7 MCE banks [ 0.022905] CPU0: Thermal monitoring enabled (TM1) [ 0.022932] process: using mwait in idle threads [ 0.022961] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.022993] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.023169] Freeing SMP alternatives memory: 28K (ffffffff81b3a000 - ffffffff81b41000) [ 0.026512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.036528] TSC deadline timer enabled [ 0.036532] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01) [ 0.036597] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.036681] ... version: 3 [ 0.036698] ... bit width: 48 [ 0.036714] ... generic registers: 4 [ 0.036739] ... value mask: 0000ffffffffffff [ 0.036761] ... max period: 0000ffffffffffff [ 0.036777] ... fixed-purpose events: 3 [ 0.036801] ... event mask: 000000070000000f [ 0.037044] x86: Booting SMP configuration: [ 0.037047] .... node #0, CPUs: #1 #2 #3 [ 0.050333] x86: Booted up 1 node, 4 CPUs [ 0.050368] smpboot: Total of 4 processors activated (21551.27 BogoMIPS) [ 0.055302] devtmpfs: initialized [ 0.055614] PM: Registering ACPI NVS region [mem 0xbccb5000-0xbce7efff] (1875968 bytes) [ 0.055778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.055871] xor: automatically using best checksumming function: [ 0.065143] avx : 27500.000 MB/sec [ 0.065263] RTC time: 16:18:05, date: 04/09/16 [ 0.065385] NET: Registered protocol family 16 [ 0.070183] cpuidle: using governor ladder [ 0.075189] cpuidle: using governor menu [ 0.075327] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.075344] ACPI: bus type PCI registered [ 0.075555] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.075588] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.075618] PCI: Using configuration type 1 for base access [ 0.075840] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.099241] raid6: sse2x1 gen() 6421 MB/s [ 0.116257] raid6: sse2x1 xor() 5013 MB/s [ 0.133268] raid6: sse2x2 gen() 8121 MB/s [ 0.150282] raid6: sse2x2 xor() 5730 MB/s [ 0.167297] raid6: sse2x4 gen() 9464 MB/s [ 0.184311] raid6: sse2x4 xor() 6666 MB/s [ 0.201324] raid6: avx2x1 gen() 12625 MB/s [ 0.218342] raid6: avx2x2 gen() 14574 MB/s [ 0.235356] raid6: avx2x4 gen() 17140 MB/s [ 0.235380] raid6: using algorithm avx2x4 gen() 17140 MB/s [ 0.235401] raid6: using avx2x2 recovery algorithm [ 0.235464] ACPI: Added _OSI(Module Device) [ 0.235483] ACPI: Added _OSI(Processor Device) [ 0.235503] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.235528] ACPI: Added _OSI(Processor Aggregator Device) [ 0.237407] ACPI : EC: EC description table is found, configuring boot EC [ 0.237431] ACPI : EC: EC started [ 0.242766] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.247269] ACPI: Interpreter enabled [ 0.247309] ACPI: (supports S0 S3 S4 S5) [ 0.247330] ACPI: Using IOAPIC for interrupt routing [ 0.247400] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.249894] ACPI: Power Resource [PUBS] (on) [ 0.250537] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.250730] ACPI: Power Resource [NVP3] (on) [ 0.250771] ACPI: Power Resource [NVP2] (on) [ 0.253815] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.253911] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) [ 0.254004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) [ 0.254097] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) [ 0.254189] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.254268] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.254366] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.254465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) [ 0.254599] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.254661] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.254810] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.254915] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.254973] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.255028] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.255076] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.255137] PCI host bridge to bus 0000:00 [ 0.255183] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.255235] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.255287] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.255343] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.255399] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window] [ 0.255456] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.255511] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.255635] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.255700] pci 0000:00:02.0: reg 0x10: [mem 0xf3000000-0xf33fffff 64bit] [ 0.255758] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.255805] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.255917] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.255979] pci 0000:00:03.0: reg 0x10: [mem 0xf3630000-0xf3633fff 64bit] [ 0.256112] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.256185] pci 0000:00:14.0: reg 0x10: [mem 0xf3620000-0xf362ffff 64bit] [ 0.256273] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.256342] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.256422] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.256499] pci 0000:00:16.0: reg 0x10: [mem 0xf3639000-0xf363901f 64bit] [ 0.256599] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.256705] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 0.256773] pci 0000:00:19.0: reg 0x10: [mem 0xf3600000-0xf361ffff] [ 0.256827] pci 0000:00:19.0: reg 0x14: [mem 0xf363e000-0xf363efff] [ 0.256877] pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f] [ 0.256963] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.257031] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.257112] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.257184] pci 0000:00:1b.0: reg 0x10: [mem 0xf3634000-0xf3637fff 64bit] [ 0.257278] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.257378] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400 [ 0.257480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.257532] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.257584] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.257719] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400 [ 0.257826] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.257877] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.257928] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.258022] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.258102] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.258202] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.258252] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.258302] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.258402] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.258476] pci 0000:00:1d.0: reg 0x10: [mem 0xf363d000-0xf363d3ff] [ 0.258590] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.258660] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.258741] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.258937] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.258998] pci 0000:00:1f.2: reg 0x10: [io 0x40a8-0x40af] [ 0.259048] pci 0000:00:1f.2: reg 0x14: [io 0x40b4-0x40b7] [ 0.259098] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7] [ 0.259147] pci 0000:00:1f.2: reg 0x1c: [io 0x40b0-0x40b3] [ 0.259197] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.259250] pci 0000:00:1f.2: reg 0x24: [mem 0xf363c000-0xf363c7ff] [ 0.259313] pci 0000:00:1f.2: PME# supported from D3hot [ 0.259409] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.259473] pci 0000:00:1f.3: reg 0x10: [mem 0xf3638000-0xf36380ff 64bit] [ 0.259534] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.259698] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.259783] pci 0000:02:00.0: reg 0x10: [mem 0xf3500000-0xf3500fff] [ 0.259927] pci 0000:02:00.0: supports D1 D2 [ 0.259975] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.261594] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.261649] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf35fffff] [ 0.261880] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000 [ 0.262126] pci 0000:03:00.0: reg 0x10: [mem 0xf3400000-0xf3401fff 64bit] [ 0.262501] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.264821] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.264875] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] [ 0.264973] pci 0000:04:00.0: [10de:1290] type 00 class 0x030200 [ 0.265057] pci 0000:04:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] [ 0.265130] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.265201] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.265256] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.265318] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.267696] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.267745] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.267797] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf2ffffff] [ 0.267856] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.268846] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 [ 0.268972] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.269012] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.269022] vgaarb: loaded [ 0.269046] vgaarb: bridge control possible 0000:00:02.0 [ 0.269131] SCSI subsystem initialized [ 0.269191] libata version 3.00 loaded. [ 0.269221] ACPI: bus type USB registered [ 0.269268] usbcore: registered new interface driver usbfs [ 0.269300] usbcore: registered new interface driver hub [ 0.269339] usbcore: registered new device driver usb [ 0.269443] PCI: Using ACPI for IRQ routing [ 0.270761] PCI: pci_cache_line_size set to 64 bytes [ 0.271100] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.271127] e820: reserve RAM buffer [mem 0xae0f5000-0xafffffff] [ 0.271155] e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff] [ 0.271287] NetLabel: Initializing [ 0.271306] NetLabel: domain hash size = 128 [ 0.271328] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.271362] NetLabel: unlabeled traffic allowed by default [ 0.271445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.271502] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.273549] clocksource: Switched to clocksource hpet [ 0.276896] pnp: PnP ACPI init [ 0.277279] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.277329] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.277377] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.277426] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.277474] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.277520] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.277571] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.277621] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.277668] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.277716] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.277765] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.277813] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.277862] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.277910] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.277959] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved [ 0.278007] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.278056] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.278237] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:04:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.278302] system 00:01: [io 0x1800-0x189f] could not be reserved [ 0.278345] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.278388] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.278431] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.278473] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.278516] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.278563] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.278608] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.278651] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.278694] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.278736] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.278779] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.278826] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.278873] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.278919] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.278966] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.279012] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.279059] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.279106] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.279154] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.279248] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.279322] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.279394] pnp 00:04: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active) [ 0.279831] pnp: PnP ACPI: found 5 devices [ 0.286125] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.286199] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.286259] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.286313] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf35fffff] [ 0.286358] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.286411] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] [ 0.286470] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref] [ 0.286528] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref] [ 0.286572] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.286620] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.286673] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf2ffffff] [ 0.286730] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.286783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.286832] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.286884] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.286936] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window] [ 0.286988] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.287037] pci_bus 0000:02: resource 1 [mem 0xf3500000-0xf35fffff] [ 0.287086] pci_bus 0000:03: resource 1 [mem 0xf3400000-0xf34fffff] [ 0.287130] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.287179] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf2ffffff] [ 0.287232] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.287283] NET: Registered protocol family 2 [ 0.287529] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.287792] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.287941] TCP: Hash tables configured (established 131072 bind 65536) [ 0.288004] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.288088] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.288178] NET: Registered protocol family 1 [ 0.288265] RPC: Registered named UNIX socket transport module. [ 0.288285] RPC: Registered udp transport module. [ 0.288306] RPC: Registered tcp transport module. [ 0.288336] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.288390] pci 0000:00:02.0: Video device with shadowed ROM [ 0.288817] PCI: CLS 64 bytes, default 64 [ 0.288887] Trying to unpack rootfs image as initramfs... [ 0.810721] Freeing initrd memory: 29056K (ffff880034730000 - ffff880036390000) [ 0.810773] DMAR: Host address width 39 [ 0.810798] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.810846] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.810870] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.810912] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.810941] DMAR: RMRR base: 0x000000bae0f000 end: 0x000000bae25fff [ 0.810969] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff [ 0.810989] DMAR: No ATSR found [ 0.811105] DMAR: dmar1: Using Queued invalidation [ 0.811127] DMAR: Setting RMRR: [ 0.811179] DMAR: Setting identity map for device 0000:00:14.0 [0xbae0f000 - 0xbae25fff] [ 0.811252] DMAR: Setting identity map for device 0000:00:1d.0 [0xbae0f000 - 0xbae25fff] [ 0.811293] DMAR: Prepare 0-16MiB unity mapping for LPC [ 0.811335] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 0.811516] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.811588] iommu: Adding device 0000:00:00.0 to group 0 [ 0.811621] iommu: Adding device 0000:00:03.0 to group 1 [ 0.811651] iommu: Adding device 0000:00:14.0 to group 2 [ 0.811684] iommu: Adding device 0000:00:16.0 to group 3 [ 0.811715] iommu: Adding device 0000:00:19.0 to group 4 [ 0.811746] iommu: Adding device 0000:00:1b.0 to group 5 [ 0.811777] iommu: Adding device 0000:00:1c.0 to group 6 [ 0.811807] iommu: Adding device 0000:00:1c.1 to group 7 [ 0.811837] iommu: Adding device 0000:00:1c.4 to group 8 [ 0.811867] iommu: Adding device 0000:00:1d.0 to group 9 [ 0.811905] iommu: Adding device 0000:00:1f.0 to group 10 [ 0.811939] iommu: Adding device 0000:00:1f.2 to group 10 [ 0.811971] iommu: Adding device 0000:00:1f.3 to group 10 [ 0.812003] iommu: Adding device 0000:02:00.0 to group 11 [ 0.812036] iommu: Adding device 0000:03:00.0 to group 12 [ 0.812069] iommu: Adding device 0000:04:00.0 to group 13 [ 0.814258] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.814279] hw unit of domain pp0-core 2^-14 Joules [ 0.814300] hw unit of domain package 2^-14 Joules [ 0.814319] hw unit of domain dram 2^-14 Joules [ 0.814341] hw unit of domain pp1-gpu 2^-14 Joules [ 0.814435] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 0.814455] ------------[ cut here ]------------ [ 0.814500] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x1ff/0x360() [ 0.814502] Info: mapping multiple BARs. Your kernel is fine. [ 0.814537] Modules linked in: [ 0.814571] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8-vgt+ #15 [ 0.814610] Hardware name: LENOVO 20AQ0060HH/20AQ0060HH, BIOS GJET86WW (2.36 ) 12/04/2015 [ 0.814613] ffffffff8189327a ffff8803301abb08 ffffffff8166c538 0000000000000001 [ 0.814649] ffff8803301abb58 ffff8803301abb48 ffffffff81062091 ffff8803301abb28 [ 0.814684] 0000000000006000 ffffc90001908000 00000000fed10000 0000000000000000 [ 0.814725] Call Trace: [ 0.814751] [<ffffffff8166c538>] dump_stack+0x45/0x57 [ 0.814781] [<ffffffff81062091>] warn_slowpath_common+0x81/0xc0 [ 0.814808] [<ffffffff81062111>] warn_slowpath_fmt+0x41/0x50 [ 0.814837] [<ffffffff810573bf>] __ioremap_caller+0x1ff/0x360 [ 0.814864] [<ffffffff81057532>] ioremap_nocache+0x12/0x20 [ 0.814895] [<ffffffff81035b85>] snb_uncore_imc_init_box+0x65/0x90 [ 0.814922] [<ffffffff8103409f>] uncore_pci_probe+0xcf/0x1a0 [ 0.814950] [<ffffffff813abbd0>] local_pci_probe+0x40/0xa0 [ 0.814985] [<ffffffff811ec858>] ? sysfs_do_create_link_sd.isra.0+0x68/0xb0 [ 0.815011] [<ffffffff813abcf6>] pci_device_probe+0xc6/0x110 [ 0.815042] [<ffffffff81478baa>] driver_probe_device+0x12a/0x2c0 [ 0.815068] [<ffffffff81478dcb>] __driver_attach+0x8b/0x90 [ 0.815097] [<ffffffff81478d40>] ? driver_probe_device+0x2c0/0x2c0 [ 0.815125] [<ffffffff81476caf>] bus_for_each_dev+0x5f/0x90 [ 0.815149] [<ffffffff81478599>] driver_attach+0x19/0x20 [ 0.815176] [<ffffffff814781fc>] bus_add_driver+0x1ac/0x220 [ 0.815203] [<ffffffff81a5cdf6>] ? uncore_types_exit+0x26/0x26 [ 0.815229] [<ffffffff8147956b>] driver_register+0x5b/0xd0 [ 0.815259] [<ffffffff813ab3c7>] __pci_register_driver+0x47/0x50 [ 0.815287] [<ffffffff81a5cec8>] intel_uncore_init+0xd2/0x2a9 [ 0.815316] [<ffffffff81a5cdf6>] ? uncore_types_exit+0x26/0x26 [ 0.815344] [<ffffffff810020f1>] do_one_initcall+0x81/0x1b0 [ 0.815380] [<ffffffff81671a39>] ? _raw_spin_unlock_irqrestore+0x9/0x10 [ 0.815410] [<ffffffff81a4d0bc>] kernel_init_freeable+0x15e/0x1e9 [ 0.815435] [<ffffffff81666190>] ? rest_init+0x80/0x80 [ 0.815458] [<ffffffff81666199>] kernel_init+0x9/0xd0 [ 0.815483] [<ffffffff8167235f>] ret_from_fork+0x3f/0x70 [ 0.815508] [<ffffffff81666190>] ? rest_init+0x80/0x80 [ 0.815531] ---[ end trace e6b1ebd28b29f949 ]--- [ 0.816051] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.816102] audit: initializing netlink subsys (disabled) [ 0.816139] audit: type=2000 audit(1460218685.805:1): initialized [ 0.816497] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.818178] VFS: Disk quotas dquot_6.6.0 [ 0.818243] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818479] NFS: Registering the id_resolver key type [ 0.818504] Key type id_resolver registered [ 0.818520] Key type id_legacy registered [ 0.818553] Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de). [ 0.819113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.819132] io scheduler noop registered [ 0.819151] io scheduler deadline registered [ 0.819223] io scheduler cfq registered (default) [ 0.819601] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.819664] intel_idle: MWAIT substates: 0x11142120 [ 0.819679] intel_idle: v0.4 model 0x45 [ 0.819705] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.820008] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.820135] ACPI: Lid Switch [LID] [ 0.820224] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.820241] ACPI: Sleep Button [SLPB] [ 0.820326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.820353] ACPI: Power Button [PWRF] [ 0.821439] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.821457] ACPI: Thermal Zone [THM0] (54 C) [ 0.821500] xenfs: not registering filesystem on non-xen platform [ 0.821594] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.821976] Non-volatile memory driver v1.3 [ 0.822024] Linux agpgart interface v0.103 [ 0.823696] brd: module loaded [ 0.823751] ahci 0000:00:1f.2: version 3.0 [ 0.834455] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 0.834520] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.834942] scsi host0: ahci [ 0.835068] scsi host1: ahci [ 0.835176] scsi host2: ahci [ 0.835253] ata1: SATA max UDMA/133 abar m2048@0xf363c000 port 0xf363c100 irq 41 [ 0.835260] ata2: DUMMY [ 0.835267] ata3: DUMMY [ 0.835508] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.837039] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.837064] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.837151] mousedev: PS/2 mouse device common for all mice [ 0.837391] rtc_cmos 00:02: RTC can wake from S4 [ 0.837564] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.837647] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.837686] Intel P-state driver initializing. [ 0.837892] hidraw: raw HID events driver (C) Jiri Kosina [ 0.838543] usbcore: registered new interface driver usbhid [ 0.838567] usbhid: USB HID core driver [ 0.838775] NET: Registered protocol family 17 [ 0.838897] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.839561] sctp: Hash tables configured (established 65536 bind 65536) [ 0.839756] Key type dns_resolver registered [ 0.840720] registered taskstats version 1 [ 0.841941] Btrfs loaded [ 0.843095] Magic number: 12:630:337 [ 0.843137] hash matches drivers/base/power/main.c:481 [ 0.843220] thermal thermal_zone0: hash matches [ 0.843270] tty tty58: hash matches [ 0.843525] PM: Hibernation image not present or could not be loaded. [ 1.139306] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.139718] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.139759] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.140114] ata1.00: ATA-8: ST480HM000-1G5162, C675, max UDMA/133 [ 1.140150] ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.140607] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.140648] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.140995] ata1.00: configured for UDMA/133 [ 1.141233] scsi 0:0:0:0: Direct-Access ATA ST480HM000-1G516 C675 PQ: 0 ANSI: 5 [ 1.141757] Freeing unused kernel memory: 1044K (ffffffff81a35000 - ffffffff81b3a000) [ 1.150319] random: systemd-udevd urandom read with 6 bits of entropy available [ 1.167348] pps_core: LinuxPPS API ver. 1 registered [ 1.167393] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 1.167702] PTP clock support registered [ 1.167945] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.168052] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.168229] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810 [ 1.168295] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.168428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.168455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.168501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.168537] usb usb1: Product: xHCI Host Controller [ 1.168579] usb usb1: Manufacturer: Linux 4.2.0-rc8-vgt+ xhci-hcd [ 1.168612] usb usb1: SerialNumber: 0000:00:14.0 [ 1.168637] ehci-pci: EHCI PCI platform driver [ 1.168769] hub 1-0:1.0: USB hub found [ 1.168811] hub 1-0:1.0: 9 ports detected [ 1.169139] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k [ 1.169167] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.170065] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 1.170105] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.170151] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.170206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.170362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.170400] sd 0:0:0:0: [sda] Write Protect is off [ 1.170441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.170486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.170520] usb usb2: Product: xHCI Host Controller [ 1.170560] usb usb2: Manufacturer: Linux 4.2.0-rc8-vgt+ xhci-hcd [ 1.170594] usb usb2: SerialNumber: 0000:00:14.0 [ 1.170760] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.170791] hub 2-0:1.0: USB hub found [ 1.170829] hub 2-0:1.0: 4 ports detected [ 1.171710] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.171808] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.171857] ehci-pci 0000:00:1d.0: debug port 2 [ 1.173182] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 1.175806] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.175856] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf363d000 [ 1.176232] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.181256] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.181338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.181388] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.181426] usb usb3: Product: EHCI Host Controller [ 1.181469] usb usb3: Manufacturer: Linux 4.2.0-rc8-vgt+ ehci_hcd [ 1.181503] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.181656] hub 3-0:1.0: USB hub found [ 1.181696] hub 3-0:1.0: 3 ports detected [ 1.182003] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.483195] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.522184] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 1.597594] usb 3-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.597645] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.597952] hub 3-1:1.0: USB hub found [ 1.598044] hub 3-1:1.0: 8 ports detected [ 1.613426] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.613486] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:2c:13:48 [ 1.613549] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.613629] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 1.619587] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 1.634886] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d [ 1.634937] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1d [ 1.634997] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1d [ 1.635045] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d [ 1.635166] microcode: Microcode Update Driver: v2.00 < tigran(a)aivazian.fsnet.co.uk>, Peter Oruba [ 1.649347] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 1.677805] BTRFS: device fsid ceeeccb8-d556-41ef-b1f5-a035090c2b2b devid 1 transid 5738 /dev/sda4 [ 1.679541] PM: Starting manual resume from disk [ 1.679565] PM: Hibernation image partition 8:7 present [ 1.679583] PM: Looking for hibernation image. [ 1.679790] PM: Image not found (code -22) [ 1.679819] PM: Hibernation image not present or could not be loaded. [ 1.688588] usb 1-1: New USB device found, idVendor=09da, idProduct=054f [ 1.688643] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.688674] usb 1-1: Product: USB Device [ 1.688706] usb 1-1: Manufacturer: A4TECH [ 1.691049] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:054F.0001/input/input6 [ 1.693701] BTRFS info (device sda4): disk space caching is enabled [ 1.707593] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560 [ 1.707661] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.715611] BTRFS: detected SSD devices, enabling SSD mode [ 1.742537] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-1/input0 [ 1.743664] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:09DA:054F.0002/input/input7 [ 1.743942] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-1/input1 [ 1.744444] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.799248] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time. [ 1.816011] tsc: Refined TSC clocksource calibration: 2693.763 MHz [ 1.816063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d43a9d412, max_idle_ns: 440795318185 ns [ 1.822670] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 1.822824] systemd[1]: Detected architecture x86-64. [ 1.823574] systemd[1]: Set hostname to <moreD-PC>. [ 1.897004] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 1.923142] systemd[1]: Listening on Journal Socket. [ 1.923237] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.923298] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.923352] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.923491] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.923558] systemd[1]: Created slice User and Session Slice. [ 1.923613] systemd[1]: Listening on LVM2 poll daemon socket. [ 1.923650] systemd[1]: Reached target User and Group Name Lookups. [ 1.923681] systemd[1]: Reached target Encrypted Volumes. [ 1.923725] systemd[1]: Listening on fsck to fsckd communication Socket. [ 1.923760] systemd[1]: Reached target Remote File Systems (Pre). [ 1.923792] systemd[1]: Reached target Remote File Systems. [ 1.923827] systemd[1]: Listening on Syslog Socket. [ 1.923870] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.923913] systemd[1]: Listening on LVM2 metadata daemon socket. [ 1.924017] systemd[1]: Listening on Journal Audit Socket. [ 1.924064] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.924106] systemd[1]: Created slice System Slice. [ 1.924359] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 1.924909] systemd[1]: Starting Set the console keyboard layout... [ 1.925236] systemd[1]: Mounting Huge Pages File System... [ 1.925509] systemd[1]: Mounting Debug File System... [ 1.928504] systemd[1]: Starting Load Kernel Modules... [ 1.931600] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.932167] systemd[1]: Mounting POSIX Message Queue File System... [ 1.932213] systemd[1]: Reached target Slices. [ 1.933056] systemd[1]: Starting Journal Service... [ 1.933606] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.933681] systemd[1]: Listening on udev Kernel Socket. [ 1.934055] systemd[1]: Starting Nameserver information manager... [ 1.934138] systemd[1]: Listening on udev Control Socket. [ 1.934856] systemd[1]: Started Load Kernel Modules. [ 1.935321] systemd[1]: Starting Apply Kernel Variables... [ 1.937106] BTRFS info (device sda4): disk space caching is enabled [ 1.937745] systemd[1]: Mounted Huge Pages File System. [ 1.937900] systemd[1]: Mounted POSIX Message Queue File System. [ 1.937945] systemd[1]: Mounted Debug File System. [ 1.938459] systemd[1]: Started Remount Root and Kernel File Systems. [ 1.941490] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.943257] systemd[1]: Started Nameserver information manager. [ 1.943974] systemd[1]: Started Apply Kernel Variables. [ 1.967262] systemd[1]: Started LVM2 metadata daemon. [ 1.967765] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.968103] systemd[1]: Starting Load/Save Random Seed... [ 1.969313] systemd[1]: Starting udev Coldplug all Devices... [ 1.971090] systemd[1]: Started Journal Service. [ 1.977129] systemd-journald[994]: Received request to flush runtime journal from PID 1 [ 2.063326] usb 1-6: New USB device found, idVendor=138a, idProduct=0017 [ 2.063375] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.063409] usb 1-6: SerialNumber: 352ee9b10fd0 [ 2.074610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.075354] ACPI: AC Adapter [AC] (on-line) [ 2.085869] ACPI: Battery Slot [BAT0] (battery present) [ 2.089613] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 2.089641] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.089702] thinkpad_acpi: ThinkPad BIOS GJET86WW (2.36 ), EC unknown [ 2.089734] thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQ0060HH [ 2.090447] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel(a)lists.sourceforge.net [ 2.090600] thinkpad_acpi: radio switch found; radios are enabled [ 2.090804] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.090860] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.092591] wmi: Mapper loaded [ 2.097156] ACPI: Battery Slot [BAT1] (battery present) [ 2.097512] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 2.115594] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 2.121161] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.127232] [drm] Initialized drm 1.1.0 20060810 [ 2.134508] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.139708] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 2.175798] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.175879] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.175964] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 2.176023] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 2.176071] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 2.176125] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 2.176178] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 2.176239] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 2.203944] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 2.204559] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 2.204790] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 2.204908] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 2.207054] iTCO_vendor_support: vendor-support=0 [ 2.214141] Intel(R) Wireless WiFi driver for Linux [ 2.214167] Copyright(c) 2003- 2015 Intel Corporation [ 2.215255] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.215319] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.215767] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.216897] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 2.234014] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2 [ 2.249606] iwlwifi 0000:03:00.0: loaded firmware version 25.30.14.0 op_mode iwlmvm [ 2.255640] ------------[ cut here ]------------ [ 2.255690] WARNING: CPU: 0 PID: 1060 at drivers/gpu/drm/drm_drv.c:570 drm_dev_alloc+0x24c/0x310 [drm]() [ 2.255692] Modules linked in: i915(+) iTCO_wdt iwlwifi iTCO_vendor_support snd_hda_codec_realtek coretemp snd_hda_codec_generic x86_pkg_temp_thermal cfg80211 kvm_intel drm_kms_helper serio_raw pcspkr snd_hda_intel lpc_ich sg drm snd_hda_codec i2c_i801 mfd_core snd_hwdep tpm_tis snd_hda_core wmi thinkpad_acpi tpm snd_pcm battery hwmon ac i2c_algo_bit shpchp snd_timer snd soundcore autofs4 microcode kvm sd_mod e1000e ehci_pci ehci_hcd xhci_pci ptp xhci_hcd pps_core [ 2.255961] CPU: 0 PID: 1060 Comm: systemd-udevd Tainted: G W 4.2.0-rc8-vgt+ #15 [ 2.255999] Hardware name: LENOVO 20AQ0060HH/20AQ0060HH, BIOS GJET86WW (2.36 ) 12/04/2015 [ 2.256004] ffffffffa03334d0 ffff88032939b9d8 ffffffff8166c538 ffff88033e210bd0 [ 2.256038] 0000000000000000 ffff88032939ba18 ffffffff81062091 ffff88032939ba28 [ 2.256070] ffff88032ff1f800 ffffffffa0938aa0 ffff88032fd18098 ffffffffa0938aa0 [ 2.256110] Call Trace: [ 2.256136] [<ffffffff8166c538>] dump_stack+0x45/0x57 [ 2.256164] [<ffffffff81062091>] warn_slowpath_common+0x81/0xc0 [ 2.256190] [<ffffffff81062175>] warn_slowpath_null+0x15/0x20 [ 2.256220] [<ffffffffa030accc>] drm_dev_alloc+0x24c/0x310 [drm] [ 2.256253] [<ffffffffa030d4d6>] drm_get_pci_dev+0x36/0x1d0 [drm] [ 2.256295] [<ffffffffa07d2146>] i915_pci_probe+0x36/0x50 [i915] [ 2.256322] [<ffffffff813abbd0>] local_pci_probe+0x40/0xa0 [ 2.256353] [<ffffffff811ec858>] ? sysfs_do_create_link_sd.isra.0+0x68/0xb0 [ 2.256379] [<ffffffff813abcf6>] pci_device_probe+0xc6/0x110 [ 2.256407] [<ffffffff81478baa>] driver_probe_device+0x12a/0x2c0 [ 2.256433] [<ffffffff81478dcb>] __driver_attach+0x8b/0x90 [ 2.256460] [<ffffffff81478d40>] ? driver_probe_device+0x2c0/0x2c0 [ 2.256486] [<ffffffff81476caf>] bus_for_each_dev+0x5f/0x90 [ 2.256508] [<ffffffff81478599>] driver_attach+0x19/0x20 [ 2.256535] [<ffffffff814781fc>] bus_add_driver+0x1ac/0x220 [ 2.256558] [<ffffffff8147956b>] driver_register+0x5b/0xd0 [ 2.256586] [<ffffffff813ab3c7>] __pci_register_driver+0x47/0x50 [ 2.256616] [<ffffffffa030d74b>] drm_pci_init+0xdb/0x100 [drm] [ 2.256639] [<ffffffffa098b000>] ? 0xffffffffa098b000 [ 2.256676] [<ffffffffa098b0ae>] i915_init+0xae/0xb6 [i915] [ 2.256702] [<ffffffff810020f1>] do_one_initcall+0x81/0x1b0 [ 2.256723] [<ffffffff81163450>] ? __vunmap+0x90/0xf0 [ 2.256754] [<ffffffff8117834f>] ? kmem_cache_alloc_trace+0xef/0x140 [ 2.256778] [<ffffffff81669f1b>] do_init_module+0x5b/0x1da [ 2.256805] [<ffffffff810d546a>] load_module+0x10ba/0x1350 [ 2.256832] [<ffffffff810d2440>] ? __symbol_get+0x70/0x70 [ 2.256864] [<ffffffff810d58bc>] SyS_finit_module+0x8c/0xa0 [ 2.256892] [<ffffffff81671f6e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2.256913] ---[ end trace e6b1ebd28b29f94b ]--- [ 2.257245] i915: intel_detect_pch [ 2.257313] vGT info:(vgt_set_device_type:536) Detected Haswell [ 2.257322] GEN device info: [ 2.257334] major: 7 minor: 5 rev: 0 [ 2.257347] max_gtt_gm_sz: 80000000 [ 2.257359] gtt_start_offset: 200000 [ 2.257371] max_gtt_size: 200000 [ 2.257381] gtt_size_entry: 4 [ 2.257394] gtt_entry_size_shift: 2. [ 2.257579] bar-0 size: 400000 [ 2.257593] bar-1 size: 20000000 [ 2.257601] bar-2 size: 40 [ 2.257618] bar0: 0xf3000004, bar1: 0xc000000c [ 2.257636] mmio size: 200000, gtt size: 200000 [ 2.257654] gttmmio: 0xf3000000, gmadr: 0xc0000000 [ 2.257675] gttmmio_base_va: 0xffffc90002800000 [ 2.257700] gmadr_va: 0xffffc90040000000 [ 2.267308] vGT: GMBUS2 init value: 200, a00 [ 2.267537] vGT info:(initialize_gm_fence_allocation_bitmaps:334) total aperture: 0x20000000 bytes, total GM space: 0x80000000 bytes [ 2.267595] vGT info:(initialize_gm_fence_allocation_bitmaps:356) reserved aperture: [0xde000000, 0xe0000000) [ 2.267610] vGT: setup tracked reg info [ 2.268000] 608 listed, 608 used [ 2.268016] total 68241 registers tracked [ 2.268031] 75 listed, 75 used [ 2.268045] total 78 registers tracked [ 2.268062] post mmio hooks initialized [ 2.268108] vGT: irq map [upstream] group: 1, bit: 28 -> [downstream] group: 2, bitmask: 0xffffffff [ 2.269287] vGT info:(vgt_setup_spt_oos:2012) 2048 oos pages preallocated [ 2.269398] scratch page is allocated at gm(0x1e000000) [ 2.269491] vGT info:(create_vgt_instance:120) vm_id=0, low_gm_sz=96MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1 [ 2.270117] VM0 Ring0 context_save_area is allocated at gm(1e011000) [ 2.270173] VM0 Ring1 context_save_area is allocated at gm(1e051000) [ 2.270228] VM0 Ring2 context_save_area is allocated at gm(1e091000) [ 2.270284] VM0 Ring3 context_save_area is allocated at gm(1e0d1000) [ 2.270379] vGT info:(create_vgt_instance:205) aperture: [0xc0000000, 0xc5ffffff] guest [0xc0000000, 0xc5ffffff] va(0xffffc90040000000) [ 2.270443] vGT info:(create_vgt_instance:216) GM: [0x0, 0x5ffffff], [0x20000000, 0x37ffffff], guest[0x0, 0x5ffffff], [0x20000000, 0x37ffffff] [ 2.271426] vGT info:(create_vgt_instance:253) filling VGT_PVINFO_PAGE for dom0: visable_gm_base=0x0, size=0x6000000 hidden_gm_base=0x20000000, size=0x18000000 fence_base=0, num=4 [ 2.271627] vGT(0): create debugfs node: virtual_mmio_space [ 2.271651] vGT(0): create debugfs node: shadow_mmio_space [ 2.271675] vGT(0): create debugfs node: virtual_mmio_space [ 2.271695] vGT(0): create debugfs node: hlistinfo [ 2.271718] vGT(0): create debugfs node: mmio_accounting [ 2.271745] vGT(0): create debugfs node: frame_buffer_format [ 2.271769] vGT(0): create debugfs node: frame_buffer_format [ 2.271893] vGT info:(vgt_init_sched_info:1262) VM-0 setup timebased schedule period 15 ms [ 2.271961] vGT: clear all GTT entries. [ 2.272020] ....dummy page (0xabb06000, 0xabb06000) [ 2.305141] vGT: allocate vGT aperture [ 2.332442] cfg80211: World regulatory domain updated: [ 2.332449] cfg80211: DFS Master region: unset [ 2.332518] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2.332561] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.332606] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.332647] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2.332708] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2.332760] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2.332820] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2.332867] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2.332909] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2.334065] Adding 5822460k swap on /dev/sda7. Priority:-1 extents:1 across:5822460k SS [ 2.334347] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 2.334995] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 2.335662] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 2.336178] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00 [ 2.336219] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb [ 2.336458] thinkpad_ec: initial ec test failed [ 2.381756] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc [ 2.381806] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.388449] vGT: start kthread for dev (0, 10) [ 2.388461] vgt_initialize succeeds. [ 2.388473] i915_start_vgt: success [ 2.388497] [drm] Virtual GPU for Intel GVT-g detected. [ 2.388542] [drm] Memory usable by graphics device = 2048M [ 2.388563] [drm] Replacing VGA console driver [ 2.389240] Console: switching to colour dummy device 80x25 [ 2.389324] VM0 write register RC_STATE_CTRL_1 with 0x0 [ 2.394915] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.394955] [drm] Driver supports precise vblank timestamp query. [ 2.395021] vGT: found matching pgt_device when registering irq for dev (0x10) [ 2.395036] vGT: track_nest: enabled [ 2.395169] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.395507] vGT info:(vga_control_w:1817) VM(0): Disable VGA mode 80000000 [ 2.395796] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (AUX Channel A) [ 2.395851] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 58 (AUX Channel A) [ 2.410971] [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 21: Can't calculate constants, dotclock = 0! [ 2.411085] [drm] VGT ballooning configuration: [ 2.411113] [drm] Mappable graphic memory: base 0x0 size 98304KiB [ 2.411146] [drm] Unmappable graphic memory: base 0x20000000 size 393216KiB [ 2.411181] [drm] balloon space: range [ 0x38000000 - 0x7ffff000 ] 1179644 KiB. [ 2.411214] [drm] balloon space: range [ 0x6000000 - 0x20000000 ] 425984 KiB. [ 2.411231] [drm] VGT balloon successfully [ 2.441782] PPGTT enabling on ring 0 page table level 2 type 5 [ 2.441808] PPGTT enabling on ring 1 page table level 2 type 5 [ 2.441834] PPGTT enabling on ring 2 page table level 2 type 5 [ 2.441860] PPGTT enabling on ring 3 page table level 2 type 5 [ 2.441896] vGT: activate vgt (0) on ring (0) [ 2.441912] vGT-0: add to render run queue! [ 2.453226] vGT: activate vgt (0) on ring (1) [ 2.453267] vGT: activate vgt (0) on ring (2) [ 2.453308] vGT: activate vgt (0) on ring (3) [ 2.453337] VM 0 activate context [ 2.453353] Ring-0 starts work for vgt-0 [ 2.453376] Ring-1 starts work for vgt-0 [ 2.453425] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Render Command Streamer MI USER INTERRUPT) [ 2.453487] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 0 (Render Command Streamer MI USER INTERRUPT) [ 2.453503] Ring-2 starts work for vgt-0 [ 2.453525] Ring-3 starts work for vgt-0 [ 2.454123] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.454444] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 [ 2.455130] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) [ 2.455313] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input16 [ 2.455405] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (AUX Channel B) [ 2.455502] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.455535] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 2.455617] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 86 (AUX Channel B) [ 2.519766] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 2.534881] usb 1-8: new high-speed USB device number 5 using xhci_hcd [ 2.542525] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.544883] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 2.555876] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 2.556119] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 2.557087] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 2.582742] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 2.595050] fbcon: inteldrmfb (fb0) is primary device [ 2.771825] usb 1-8: New USB device found, idVendor=5986, idProduct=026a [ 2.771872] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.771903] usb 1-8: Product: Integrated Camera [ 2.771936] usb 1-8: Manufacturer: SunplusIT INC. [ 2.815856] clocksource: Switched to clocksource tsc [ 3.631334] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Pipe A vblank) [ 3.631380] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Primary Plane A flip done) [ 3.631430] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 42 (Pipe A vblank) [ 3.631482] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 48 (Primary Plane A flip done) [ 3.648121] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(0), offset=0x6102c,len=4, val=0x0!!! [ 3.664650] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Primary Plane B flip done) [ 3.664715] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 49 (Primary Plane B flip done) [ 3.698012] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Pipe B vblank) [ 3.698072] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 43 (Pipe B vblank) [ 3.703355] VM0 write register RC_STATE_CTRL_1 with 0x0 [ 3.703471] VM0 write register RC_STATE_CTRL_1 with 0x0 [ 3.703520] VM0 write register RC_STATE_CTRL_1 with 0x88040000 [ 3.714763] vGT warning:(vgt_emulate_read:350) vGT: untracked MMIO read: vm_id(0), offset=0x6102c,len=4, val=0x0!!! [ 3.743503] Console: switching to colour frame buffer device 240x67 [ 3.871105] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.874801] Bluetooth: Core ver 2.20 [ 3.874826] NET: Registered protocol family 31 [ 3.874853] Bluetooth: HCI device and connection manager initialized [ 3.874873] Bluetooth: HCI socket layer initialized [ 3.874894] Bluetooth: L2CAP socket layer initialized [ 3.874920] Bluetooth: SCO socket layer initialized [ 3.883346] usbcore: registered new interface driver btusb [ 3.901706] Bluetooth: hci0: read Intel version: 370710018002030d53 [ 3.901736] Bluetooth: hci0: Intel device is already patched. patch num: 53 [ 4.102888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.102914] Bluetooth: BNEP filters: protocol multicast [ 4.102939] Bluetooth: BNEP socket layer initialized [ 4.874225] random: nonblocking pool is initialized [ 5.111376] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (RP DOWN threshold interrupt) [ 5.111435] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Render Frequency Downward Timeout During RC6 interrupt) [ 5.111493] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 65 (RP DOWN threshold interrupt) [ 5.111556] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 67 (Render Frequency Downward Timeout During RC6 interrupt) [ 5.220836] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00 [ 5.220879] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb [ 5.220898] thinkpad_ec: initial ec test failed [ 5.237783] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00 [ 5.237825] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb [ 5.237844] thinkpad_ec: initial ec test failed [ 5.661227] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 5.852747] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 [ 7.681868] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.268169] e1000e: eth0 NIC Link is Down [ 10.465155] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 10.465190] Bluetooth: HIDP socket layer initialized [ 10.466202] hid-generic 0005:0A5C:8502.0003: unknown main item tag 0x0 [ 10.466469] input: FILCO Bluetooth Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:0A5C:8502.0003/input/input20 [ 10.467049] hid-generic 0005:0A5C:8502.0003: input,hidraw2: BLUETOOTH HID v1.1b Keyboard [FILCO Bluetooth Keyboard] on 00:15:00:cb:c6:03 [ 10.598044] e1000e: eth0 NIC Link is Down [ 14.026627] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.610546] Bluetooth: RFCOMM TTY layer initialized [ 14.610578] Bluetooth: RFCOMM socket layer initialized [ 14.610597] Bluetooth: RFCOMM ver 1.11 [ 14.864794] fuse init (API version 7.23) [ 15.299628] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (RP UP threshold interrupt) [ 15.299710] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 66 (RP UP threshold interrupt) [ 38.704693] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(0), offset=0x6102c,len=4, val=0x0!!! [ 38.770489] vGT warning:(vgt_emulate_read:350) vGT: untracked MMIO read: vm_id(0), offset=0x6102c,len=4, val=0x0!!! [ 108.484016] vGT info:(vgt_handle_default_event_phys:1235) IRQ: receive event (Blitter Command Streamer MI USER INTERRUPT) [ 108.484089] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(0) receive event 20 (Blitter Command Streamer MI USER INTERRUPT) [ 142.678352] VFIO - User Level meta-driver version: 0.3 [ 144.465114] vfio_iommu_type1_attach_group: No interrupt remapping support. Use the module param "allow_unsafe_interrupts" to enable VFIO IOMMU support on this platform [ 151.423274] usb 1-7: USB disconnect, device number 4 [ 151.817221] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 151.983182] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc [ 151.983246] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 151.998290] Bluetooth: hci0: read Intel version: 370710018002030d53 [ 151.998332] Bluetooth: hci0: Intel device is already patched. patch num: 53 [ 168.994646] vfio_iommu_type1_attach_group: No interrupt remapping support. Use the module param "allow_unsafe_interrupts" to enable VFIO IOMMU support on this platform [ 191.970100] vGT info:(create_vgt_instance:120) vm_id=4, low_gm_sz=256MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1 [ 191.971159] VM4 Ring0 context_save_area is allocated at gm(1e152000) [ 192.027123] VM4 Ring1 context_save_area is allocated at gm(1e192000) [ 192.027179] VM4 Ring2 context_save_area is allocated at gm(1e1d2000) [ 192.027248] VM4 Ring3 context_save_area is allocated at gm(1e212000) [ 192.027354] vGT info:(create_vgt_instance:205) aperture: [0xc6000000, 0xd5ffffff] guest [0xc6000000, 0xd5ffffff] va(0xffffc90046000000) [ 192.027429] vGT info:(create_vgt_instance:216) GM: [0x6000000, 0x15ffffff], [0x38000000, 0x4fffffff], guest[0x6000000, 0x15ffffff], [0x38000000, 0x4fffffff] [ 192.028887] vGT info:(create_vgt_instance:253) filling VGT_PVINFO_PAGE for dom4: visable_gm_base=0x6000000, size=0x10000000 hidden_gm_base=0x38000000, size=0x18000000 fence_base=4, num=4 [ 192.035210] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(4) receive event 0 (Render Command Streamer MI USER INTERRUPT) [ 192.218764] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(01) base_gfn(0x100000) npages(262144) [ 192.219965] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(07) base_gfn(0xe0000) npages(2048) [ 192.220004] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(06) base_gfn(0xbfffe) npages(2) [ 192.693290] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(05) base_gfn(0x100) npages(786174) [ 192.693348] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(32) [ 192.693470] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(00) base_gfn(0x0) npages(160) [ 192.693503] vGT info:(create_vgt_instance:293) writing virtual 0xfc opregion for VM4 [ 192.693534] vGT info:(kvmgt_opregion_init:602) opregion initialized [ 192.693563] vGT(1): create debugfs node: virtual_mmio_space [ 192.693586] vGT(1): create debugfs node: shadow_mmio_space [ 192.693609] vGT(1): create debugfs node: virtual_mmio_space [ 192.693627] vGT(1): create debugfs node: hlistinfo [ 192.693648] vGT(1): create debugfs node: mmio_accounting [ 192.693670] vGT(1): create debugfs node: frame_buffer_format [ 192.693692] vGT(1): create debugfs node: frame_buffer_format [ 192.693835] vGT info:(vgt_init_sched_info:1262) VM-4 setup timebased schedule period 15 ms [ 192.695005] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(32) [ 192.695111] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(8) [ 192.695159] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(08) base_gfn(0xc8) npages(24) [ 192.695505] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(8) [ 192.695563] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(08) base_gfn(0xc8) npages(24) [ 192.695655] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(16) [ 192.695703] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(08) base_gfn(0xd0) npages(16) [ 192.695953] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(16) [ 192.696009] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(08) base_gfn(0xd0) npages(16) [ 192.696091] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(24) [ 192.696136] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(08) base_gfn(0xd8) npages(8) [ 192.696389] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(24) [ 192.696445] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(08) base_gfn(0xd8) npages(8) [ 192.696529] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(32) [ 192.696756] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(32) [ 192.696858] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(40) [ 192.697099] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(40) [ 192.697212] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(48) [ 192.697450] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(48) [ 192.705724] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(05) base_gfn(0x100) npages(786174) [ 192.776263] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(786238) [ 192.783810] Programming bar 0x10 with 0xffffffff [ 192.783842] Programming bar 0x10 with 0xf3000004 [ 192.783862] Programming bar 0x14 with 0xffffffff [ 192.783879] Programming bar 0x14 with 0x0 [ 192.783901] Programming bar 0x18 with 0xffffffff [ 192.783921] Programming bar 0x18 with 0xc000000c [ 192.783941] Programming bar 0x1c with 0xffffffff [ 192.783958] Programming bar 0x1c with 0x0 [ 192.783980] Programming bar 0x20 with 0xffffffff [ 192.783998] Programming bar 0x20 with 0x4001 [ 192.784018] Programming bar 0x24 with 0xffffffff [ 192.784035] Programming bar 0x24 with 0x0 [ 192.784699] Programming bar 0x20 with 0xc040 [ 192.784890] Programming bar 0x10 with 0xfe400000 [ 192.784905] Programming bar 0x14 with 0x0 [ 192.785407] Programming bar 0x18 with 0xc0000000 [ 192.785422] Programming bar 0x1c with 0x0 [ 192.786306] add_map: domid=4 gfn_s=0xc6000 mfn_s=0xc6000 nr_mfns=0x10000 [ 192.786354] vGT info:(kvmgt_add_apt_slot:545) vgt-4, p1: 0xc6000, g1: 0xc6000, nr_mfns: 65536, hva: 0xffffc90046000000 [ 192.792266] vGT info:(__kvmgt_set_trap_area:321) VM4: registered iodev: 0xfe400000 - 0xfe7fffff [ 192.877905] vGT info:(vgt_handle_default_event_virt:1038) IRQ: VM(4) receive event 20 (Blitter Command Streamer MI USER INTERRUPT) [ 192.920055] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(04) base_gfn(0xfe800) npages(64) [ 192.920674] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(04) base_gfn(0xfe800) npages(64) [ 192.932992] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(786238) [ 192.933289] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(8) [ 193.007177] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(04) base_gfn(0xc8) npages(786230) [ 193.007748] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(03) base_gfn(0xc0) npages(8) [ 193.015797] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(04) base_gfn(0xc8) npages(786230) [ 193.016026] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(03) base_gfn(0xc0) npages(11) [ 193.016093] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(04) base_gfn(0xcb) npages(3) [ 193.016132] kvm: zapping shadow pages for mmio generation wraparound [ 193.016173] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(05) base_gfn(0xce) npages(2) [ 193.102404] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(08) base_gfn(0xd0) npages(786222) [ 193.111322] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(08) base_gfn(0xd0) npages(786222) [ 193.111578] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(08) base_gfn(0xd0) npages(32) [ 193.111627] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(09) base_gfn(0xf0) npages(16) [ 193.183138] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(10) base_gfn(0x100) npages(786174) [ 193.392870] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(11) base_gfn(0xa0) npages(16) [ 200.869060] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(11) base_gfn(0xa0) npages(16) [ 200.870222] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(11) base_gfn(0xa0) npages(16) [ 201.368675] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(11) base_gfn(0xa0) npages(16) [ 201.370291] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(11) base_gfn(0xa0) npages(16) [ 201.402164] vGT info:(kvmgt_unpin_slot:812) VM4: unpinned slot id(11) base_gfn(0xa0) npages(16) [ 201.402647] vGT info:(kvmgt_pin_slot:787) VM4: pinned slot id(11) base_gfn(0xa0) npages(16) [ 201.791996] Programming bar 0x10 with 0xffffffff [ 201.792018] Programming bar 0x14 with 0xffffffff [ 201.792038] Programming bar 0x18 with 0xffffffff [ 201.792057] Programming bar 0x1c with 0xffffffff [ 201.792077] Programming bar 0x20 with 0xffffffff [ 201.792096] Programming bar 0x24 with 0xffffffff [ 201.792136] Programming bar 0x10 with 0xfe400004 [ 201.792153] Programming bar 0x14 with 0x0 [ 201.792174] Programming bar 0x18 with 0xc000000c [ 201.792190] Programming bar 0x1c with 0x0 [ 201.792209] Programming bar 0x20 with 0xc041 [ 201.792225] Programming bar 0x24 with 0x0 [ 201.792287] vGT: write to MSI capa(92) with val (80000000) [ 209.583034] kvm [10553]: vcpu0 unhandled rdmsr: 0x641 [ 209.745167] VM4 Read SCI Trigger Register, bytes=4 value=0x8000 [ 210.041381] Programming bar 0x10 with 0xfe400000 [ 210.041404] Programming bar 0x14 with 0x0 [ 210.041429] Programming bar 0x18 with 0xc0000000 [ 210.041449] Programming bar 0x1c with 0x0 [ 210.041473] Programming bar 0x20 with 0xc040 [ 210.041493] Programming bar 0x24 with 0x0 [ 210.041625] vGT: write to MSI capa(92) with val (80000000) [ 210.041664] vGT: write to MSI capa(94) with val (fee0300c) [ 210.041695] vGT: write to MSI capa(98) with val (80004961) [ 210.041726] vGT: write to MSI capa(92) with val (80000001) [ 215.639746] VM4 Read SCI Trigger Register, bytes=4 value=0x8000 [ 215.640095] VM4 write register RC_STATE_CTRL_1 with 0x0 [ 215.640123] VM4 write register RC_STATE_CTRL_1 with 0x8040000 [ 215.641529] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(4), offset=0xa210,len=4, val=0x0!!! [ 215.641586] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(4), offset=0xa278,len=4, val=0xffff0000!!! [ 215.641641] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(4), offset=0xa270,len=4, val=0xffff0000!!! [ 216.134571] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.134606] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.134635] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.134667] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.134695] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.134728] VM4 Read SCI Trigger Register, bytes=2 value=0x8000 [ 216.140576] vGT info:(vga_control_w:1817) VM(1): Disable VGA mode 8000298e [ 216.140722] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(4), offset=0x4024,len=4, val=0xf0007fff!!! [ 216.140849] vGT warning:(vgt_emulate_write:451) vGT: untracked MMIO write: vm_id(4), offset=0x110000,len=4, val=0x0!!! [ 216.140994] PPGTT enabling on ring 0 page table level 2 type 5 [ 216.141020] PPGTT enabling on ring 2 page table level 2 type 5 [ 216.141046] PPGTT enabling on ring 1 page table level 2 type 5 [ 216.141073] PPGTT enabling on ring 3 page table level 2 type 5 Hope someone can give me some advice on how to resolve this problem, thanks!

4 years, 10 months

2
3
0 / 0

Code 12 while using QEMU compositor mode

by Eddie Yen

Hello, everyone. Today I'm tried the 2016Q1 version of KVMGT already, but I got code 12 error on my P6300 in Windows 7 Guest when I try on QEMU compositor. Here is some information about my setup, GRUB： GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_iommu=igfx_off i915.hvm_boot_foreground=1 i915.enable_cmd_parser=0 loglvl=all guest_loglvl=all conring_size=4M noreboot i915.enable_vgtbuffer=1 i915.propagate_monitor_to_guest=0" QEMU cmd： #/bin/sh qemu-system-x86_64 -m 8192 -smp 3 \ -enable-kvm \ -M pc -machine kernel_irqchip=on \ -hda /home/ubuntu/test.img \ -net nic,macaddr=52:54:00:12:34:56 -net tap,script=/home/ubuntu/qemu-ifup \ -vgt -vga vgt -vgt_low_gm_sz 128 \ -vgt_high_gm_sz 384 -vgt_fence_sz 4 And there is the dmesg message when starting Guest: http://pastebin.com/HfpWeXmh There is one thing I feel strange is, when I configure the QEMU, I got this at beginning "Intel GVT-g compositor egl will be disabled due to EGL library missed." And I check configure result, found that: Intel GVT-g support yes Intel GVT-g compositor egl no Intel GVT-g compositor blt yes Is that cause Code 12 issue? Many thanks, Eddie.

4 years, 10 months

4
6
0 / 0

2021

2020

2019

2018

2017

2016

2015

iGVT-g April 2016